TouchCore Family (Digital-type / Capapcitive Touch Sensor Engine)
Download (Documentation Materials)

PRODUCT

Spec. Sheet (Eng)

Spec. Sheet (Kor)

TouchCore400

48-MLF

(Down)

N/A

TouchCore410

68-MLF

TouchCore460

124-DRMLF
 

Features
  • CPU
    - Digital Signal Processor (DSP)
    - Signal Processing 160 Instructions
    - 16 / 32 / 48-bit Variable Length Instructions
    - Barrel Shift & ALU
    - MAC with 17 bits X 17 bits Multipliers
     
  • 64kB (TC460) / 32kB (TC410) / 24kB (TC400) FLASH (Including 2kB EEPROM)
      
  • 16KB RAM
    - 8kB for SRAM Code Fetch (Timing Critical Function)
    - 8kB for Data, Stack & Etc.
     
  • Operating Voltage : 2.2V ~ 3.6V
     
  • Operating Frequency
    - Max. 24MHz @+3.0V & FALSH
    - Max. 48MHz @+3.0V & RAM
     
  • Max. Programmable 103(TC460), 59(TC410), 41(TC400) I/O Pins
    - Push-Pull Control, Open drain Output, Push-Pull Output
    - TTL and CMOS compatible logic levels
     
  • Internal RING OSC with Calibration Function
    - 24MHz     (±3%) @ +2.7V ~ 3.6V (±3%)
    - 32kHz (±10%) @ +1.62V (±10%) (Low Power OSC)
     
  • 96-channel (TC460), 52-channel (TC410), 34-channel (TC400) Touch Sensing
    - Capacitive Type Touch sensing
    - Digital sensing
    - 16bit level resolution
     
  • Three 16-bit Timer/Counters
     
  • 2-Channel I2C (Master/Slave)
     
  • 26-bit Programmable Watchdog Timer
     
  • 96-channel (TC460), 52-channel (TC410), 34-channel (TC400) 12-bit ADC
     
  • 1-channel SPI Comm. (Master/Slave)
     
  • 2-channel UART Comm.
     
  • 48-channel (TC460), 27-channel (TC410), 17-channel (TC400) 8-bit High Speed WPM for LED Dimming
     
  • 17 Interrupt Sources
    - Timer0/1/2, WDT, SPI, I    2C 0/1, UART 0/1, TS, ADC
    - 6 External Interrupt Source : Both Edge/Level
    - Two-level interrupt priority
     
  • Reset Sources
    - On-chip Power-On-Reset (POR)
    - External Reset
    - Low Voltage Detector Reset (LVR)
    - Watchdog Timer Reset
     
  • Power Down Wake-up Sources
    - Reset Sources + 6 External interrupt (Both Lvevls)
    -     WDT interrupt
     
  • Power Consumption
    - Active Current         :  Max 1mA @3.3V, 2MHz
    - Idle Current           :  Max 0.5mA @3.3V, 2MHz
    - Stop Current           :  Max 40uA @3.3V
     
  • E.S.D. Protection up to
    - 2,000V for Normal I/O Pin
     
  • Latch-up Protection Up to ±200mA
     
  • Package
    - 48-MLF (6mm X 6mm)              : TC400
    - 68-MLF (8mm X 8mm)              : TC410
    - 124-DRMLF (10mm X 10mm)     : TC460