AmpCore Family (Application specific MCU with OP-AMP & Comparator)

Download (Documentation Materials)

PRODUCT

Spec. Sheet(Eng)

Brief User's Manual (Eng)

AmpCore100

40-MLF

(Down)

(Down)

Download (Support Application)

HEADER

EXAMPLE

APPLICATION

Down

N/A

N/A


 

Features
  • CPU
    - 8-bit turbo 80C52 architecture

    - 4 cycles/ 1machine cycle
    - instruction level compatible with Intel 80C52
     
  • 8kB FLASH (Including 1kB User EEPROM)
      
  • 256B Internal AUX. RAM
     
  • 256B Internal RAM
     
  • Operating Voltage : +2.2V to +5.5V
     
  • Operating Temperature : -40¡É ~ 85¡É
     
  • Operating Frequency
    - Max. 6MHz @ 3V

     
  • Max. Programmable 30 I/O Pins
    - Pull-up Control, Open drain, Push-Pull Output

    - Pull-down Control, Open drain, Push-Pull Output (P4.7)

    - TTL and CMOS compatible logic levels
     
  • Low Voltage Detector (LVD) : +1.6V
     
  • Internal RING OSC with Calibration Function
    - Max. 6MHz
    @ 5.0V
    - 4MHz @ 2.7V ~ 5.0V (±3%)
    - 32kHz @ 2.7V (±10%) (Low power OSC)
     
  • 24-channel 10-bit ADC
     
  • 2-channel differential OP-AMP
     
  • Supporting ISP / IAP / MDS
     
     
  • 16-bit Programmable Watchdog Timer
     
  • Three 16-bit Timer/Counters
     
  • 1-Channel I2C (Master/Slave)
     
  • 1-Channel SPI (Master/Slave)
     
  • 1-channel UART
     
  • 12-channel 8bit high speed PWM for DIMMING
     
  • 12 Interrupt Sources
    - Timer0/1/2, WDT, I2C 0/1, UART, ADC
    - 4 External Interrupt Source : Both Edge/Level

    - Four/Two-level interrupt priority
     
  • Reset Sources
    - On-chip Power-On-Reset
    - External reset

    - Low Voltage Detector Reset
    - Watchdog Timer Reset

     
  • Power Down Wake-up Sources
    - Reset Sources + 4 External interrupt (Both Lvevls)

    -
    WDT interrupt
     
  • Power Consumption
    - Active Current         :  Max 1mA @3.3V, 2MHz

    - Idle Current           :  Max 0.5mA @3.3V, 2MHz

    - Stop Current         :  Max 110uA @3.3V (all clock off)
     
  • E.S.D. Protection Up to 2000V
     
  • Latch-up Protection Up to ±200mA
     
  • Package
    - 40-MLF (5mm X 5mm)